5pcs 110-220V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$81.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:AC220V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
5 x High precision microcomputer temperature controller
Weight | 0.45 kg |
---|
Customers Also Viewed
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
$13.49Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openOverviewSensitive material MQ-7 gas sensors used in clean air, low conductivity tin oxide (SnO2). High-low temperature cycling detection mode (1.5V heating) carbon monoxide detector, conductivity sensor with the increasing concentration of carbon monoxide gas in the air increases,high-temperature (5.0V heating) cleaning cryoadsorption stray gases. Using a simple circuit to change the conductivity, …
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection ModuleRead More
Mini DC12V 3M Micro Quiet Motor Submersible Brushless Water Pump
$24.29Electrical Pump & ValveAdd to cartDescriptionMini DC 12V 3M 240L/H Micro Quiet Brushless Motor Submersible Water PumpFeatureBrushless, permanent magnetic rotor, maintenance-free.Stator and circuit board sealed by epoxy resin.The axis is enclosed with static sealing, which can avoid leaking problemsAdopt high performance stainless steel shaft.Amphibious design, able to work either on land or in water.Super long working life (more than 30,000 …
Mini DC12V 3M Micro Quiet Motor Submersible Brushless Water PumpRead More
100-240V Power Adapter Power Supply Adaptor Plugs AU Standard
$16.19AC/DC AdaptersAdd to cartPower Supply Adaptor for Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105SpecificationsInput:AC 100-240V, 50/60HzOutput:DC 12V 1AColor:BlackSize(Approximately):7.8*4.9*3.2cm(approx.)Wire length(Approximately):93cmPlug type:AU PlugFeatures-Voltage Protection-Short Circuit Protection-Current Protection-Sealed for protection against moisture and humidityApplicationFor Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105Package included1 x Adaptor
3pcs BT201 Dual Mode 5.0 Bluetooth Lossless Audio Power Amplifier Board Module TF Card U Disk Ble Spp Serial Port Transparent
$16.31Amplifier BoardAdd to cart>>>Manual:Click here to openOverviewBT201 5.0 Bluetooth module is a 4-in-1 single chip that supports bluetooth, usb flash drive and TF card. The highlight of the chip is that it supports lossless music playback, simple and clear serial port control function, BLE pass-through function and SPP pass-through function.It greatly reduces the development difficulty of embedded bluetooth …
100pcs 30pF 5.08MM 50V Multilayer Monolithic Ceramic Capacitor
$5.09Electronic Accessories & SuppliesAdd to cartDescriptionFrequency characteristics:low frequencyAdjustment method:fixedLead Type:Radial Lead WireTolerance:÷ 10 (%)Pressure resistance:50 (V)Capacity:30pFFeaturesLarge capacity, small size, high reliability,Stable capacity, high temperature and humidity resistance.Applications:Widely used in electronic precision instruments.A variety of small electronic equipment for resonance, wave filtering Package included100 x 30pF capacitor
220V 750W Stainless Steel Deep Well Submersible Screw Pump Water Pump
$546.74Electrical Pump & ValveAdd to cartSpecificationsName:Submersible PumpColor:grayMaterials:stainless steelPower:750WVoltage:220VSize:540*100mmCord Length:18mPump Head/Lift:75m MaxFeatures-Energy-efficient, easy to install, low energy, low noise.-Stainless steel body, strong and durable, not easy to rust.-Stainless steel filter prevents impurities from entering the pump and has a long service life.Package Included1 x Submersible Pump3 x Accessories(distribute the adapter according to your country)
20Pcs Mini DC-DC1.3A Voltage Converter Step Down Module 12V 24V to 5V 3.3V 9V with integrated inductor for 360 RC
$31.43Power Supply ModuleAdd to cartFeaturesThe maximum output current is 1.3A, and it is running within 1A for a long time;Non-isolated DC synchronous rectification with up to 94% conversion efficiencyOne-piece inductor, lower heat than ordinary shielded inductorUniversal, optional output voltage, spot welding directly on the boardOutput with LED indicator for easy and visual indication of voltage outputWith enable (EN) port, …
65x37mm Universal Slotted Frame Rail Floor Jack Guard Adapter Lift Rubber Pad Rubber Mat
$22.67RubbersAdd to cartDescriptionThis rubber pad is suitable for car Jack with 55mm intake.SpecificationType:Rubber Pad Universal Diameter 65×37 With Wide V-GrooveMaterial:RubberColor:BlackDiameter:65mmTotal height:37 mmGroove Top:15mmGroove Bottom:10mmGroove Height:8mmFeatures1. Universally applicable.2. Industrial Quality.3. Very robust (min. 80 Shore).4. Easy install and durable use.5. Great quality and great Fitment.6. Direct Replacement, No Modifications Necessary.FitmentSuitable For Car Jack With 55mm IntakePackage Included1 x …
65x37mm Universal Slotted Frame Rail Floor Jack Guard Adapter Lift Rubber Pad Rubber MatRead More
Reviews
There are no reviews yet.