5pcs 110-220V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$81.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:AC220V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
5 x High precision microcomputer temperature controller
Weight | 0.45 kg |
---|
Customers Also Viewed
EraClean Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360 Cleaning Machine From You Pin
$80.99Laboratory Heating EquipmentsAdd to cartDear Customer,Thank you for supporting, the orders will be shipped before 10st Nov.Hope your kindly understanding and support. Thank you:)Description[New Release] EraClean Mini Ultrasonic Cleaner from XIAOMI ECO Brand System, Quality Guaranteed, With Mute Quiet Design, Cleaning Anything You Want in 3 Minutes.Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360° Thoroughly …
DIY 12V 420W 6-Chip Semiconductor Refrigeration Cooling Device thermoelectric Cooler Air Conditioning High Cooling Efficiency
$129.99Electronic Accessories & SuppliesAdd to cartDescriptionName:420W 6-Chip Semiconductor Air-Conditioning DIY Radiator KitMaterial:metalSize:160*60*60mmVoltage:12VPower:420W( 6-Chip) In the case of 15.4VElectric current:36ASteady current:27ARed line:inch+inch , Black line:inch-inchRefrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, sealability ,etc…UseSmall space cooling, learning the principle of semiconductor refrigeration, the company developed cooling equipment research, pet air-conditioning, etc., use to cool down …
Lampow LP-9027 DC 12V 24V Waterproof Mirror Touch Sensor Control Switch for LED Strip Light
$15.30Electronic Accessories & SuppliesAdd to cartDescriptionType:LP-9027Output Mode:Sensor output, input is outputSwitch mode:touch sensor on/off switchInstallation:recessed installationWaterproofLightweight and compact sizeEasy to install, stable, long lifeApplication:LED light, LED strip, cabinet kitchen light, kinds of electric applicationsSpecificationsMaterial:Plastic+MetalColor:WhiteVoltage:12-24VOutput Current:3AQuiescent CurrentService time:> 80000hWorking Temperature:-20-50°Hole Diameter:17mmCable Length:0.5m(Output) 1.5m(Input)Size:19*11mmPackage included1 x Touch Sensor Control Switch
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + Expansion Board Prototyping for M5StickC ESP32 Mini IoT Development Board Finger Computer
$42.47Motherboard & Development BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.This is without watch accessories,If you like with watch accessories>>>with watch accessories:Click here to BUY>>>More M5Stack Item:Click here to openDescriptionM5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller Board
$16.71Sensor & Detector ModuleAdd to cart>>>Manual:Click here to open Overview 1. This is a gesture recognition sensor based on PAJ7620U2. It can recognize 9 different gestures including up, down, left, right, front, back, clockwise, counterclockwise, and swing. 2. The gesture recognition module uses the I2C interface and it use the corresponding library function to program and control. The signal returned …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller BoardRead More
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe Conduction
$39.35RF amplifierAdd to cartFeature1. Magnetic field extra large probeInterface:SMA outer screw inner holeProduct size:110*45.5MMProduct weight 8 grams2. Magnetic field large probeInterface:SMA outer screw inner holeProduct size:110*30MMProduct weight 8 grams3. Magnetic field medium probeInterface:SMA outer screw inner holeProduct size:110*20MMProduct weight 6 grams4. Small magnetic field probeInterface:SMA outer screw inner holeProduct size:110*12.5MMProduct weight 6 grams5. Electric field probeInterface:SMA outer screw …
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe ConductionRead More
Reviews
There are no reviews yet.