XH-W1501 Hot and Cold Automatic Switching 2 Way Relay Output Temperature Adjustable thermostat Constant Temperature Alarm
$22.71
Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision digital thermostat
Product model:XH-W1501
Temperature range:-50~110°C
Temperature measurement accuracy:+-0.1 °C
Temperature control range:-40~100°C
Control accuracy:0.1 ° C
Refresh rate:0.5S
Temperature probe:NTC10K/B3950 waterproof probe (L=50CM)
Supply voltage:DC12V/24V
LED display color:red
Applicable environment:-10~60°C Humidity 20%~85% (non-condensing)
Output type:2 relay outputs, capacity 220V5A/12V10A
Product size:panel 100 x 66mm, main board 78 x 51 x 17mm
Opening size:78 x 51mm (M3 screw, hole diameter 3.5mm)
Net weight:80g
Package includes
1 x High precision digital thermostat
Code:Code description:Set range:Factory settings
P0:Backlash setting:0.1-15:2
P1:Temperature correction:-7~7°C:0
P2:Heating delay start time:0-300 seconds:0
P3:Cooling delay start time:0-300 seconds:0
P4:High temperature alarm:ON/OFF/-50~110:OFF/110°C
P5:Low temperature alarm:ON/OFF/-50~110:OFF/50°C
Pressing the +- button while powering down can restore the factory settings.
P0 Hysteresis setting
Press and hold the SET button to enter the internal setting, select P0, and press the SET button again to set the hysteresis value. (The hysteresis is the difference between the thermostat and the re-operation after reaching the set value, for example, the heating mode, heating to 408C and stopping at 35 °C to start heating again, the difference is 5)
P1 Temperature correction
Press and hold the SET button to enter the internal setting, select P1, and press the SET button again to set the correction value. (For example, the detection temperature is 26 ° C, and the actual temperature is 25 ° C, the calibration temperature to be set is _1 ° C, real-time temperature = temperature value before correction + correction value)
P2 Heating delay start time
This function is used for compressor delay start. If you are not controlling the compressor, you can ignore this setting. (If you are new to this thermostat, if you are not familiar with the settings, don’t set this item first)
P3 Cooling delay start time
This function is used for compressor delay start. If you are not controlling the compressor, you can ignore this setting. (Do not set this item if you are not familiar with the settings when you first touch this thermostat)
P4 High temperature alarm
Press and hold the Set button to enter the internal settings. Select P4, press the setting button, select the ON state, and press the setting button to set the required high temperature alarm value (set the high temperature alarm value. When the detected temperature exceeds this value, the screen displays the upper part of 888, the buzzer sends out inchAlarminch alarm! When the temperature is lower than the high temperature alarm value, the buzzer stops alarming)
P5 Low temperature alarm
Press and hold the Set button to enter the internal settings. Select P5, press the setting button, select the ON state, and then press the _ down setting button to set the required low temperature alarm value (set the low temperature alarm value. When the detected temperature is lower than this value, the screen displays the upper part of 888, buzzer The device emits a inchdididi’ alarm sound! When the temperature is higher than the low temperature alarm value, the buzzer stops alarming)
Weight | 0.05 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.