Geekcreit Pseudo Glow Tube Clock DIY Kit Luminous Electronic Clock Creative Personality DIY Art Decoration Fashion Decoration Gift Parts
$228.95
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
You can customize the color you like, 16 million colors can be controlled at will, and there are 5 display modes in the design.
↘Custom color
Rainbow
breathing
Simultaneous gradient
Test mode
Built-in button battery, and it will not be affected by power failure; plug and play, using Type-C interface, the general charging head can be used.
Humanized adjustment function, it can be dimmed when sleeping at night for fear of glare, and it can be adjusted higher if it is not bright enough during the day.
Feature
Precise Time
10 Brightness adjustment
Ten thousand colors
Long life
Type-C interface
Security and stability
Size:31cmx8.7cm
Bottom button settings(From top to bottom is minus , plus, SET)
Under non-setting state, press-key to brighten up (level 10)
Adjust the time method:press and hold the SET button for about 5 seconds to enter the setting state, press the plus/minus button to adjust the hour, then press the plus/minus button to switch to minutes, press the plus/minus button to adjust the minutes, and then press the SET button to switch to seconds Clock, press the plus/minus key again to adjust the seconds, press SET again to exit the setting state.
In the non-setting state, press the SET key to switch between 5 modes
0 custom color
1 rainbow
2 breathing
3 Simultaneous gradient
4 Test mode
Package included
1 x Pseudo Glow Tube Clock DIY Kit
Weight | 0.8 kg |
---|
Customers Also Viewed
MP-4 Gas Sensor Methane Sensor Detecting Combustible Methane Gas at Semiconductor Combustible DIY for Safety Detection System
$5.01Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.OverviewThe MP-4 methane sensor uses a multi-layer thick film manufacturing process to fabricate a heater and a metal oxide semiconductor gas sensing layer on both sides of a micro Al2O3 ceramic substrate, …
5pcs 5W LED Driver input AC110/220V to DC 15-18V Built-in Drive Power Supply Adjustable Lighting for DIY LED Lamps
$11.61Driver ModuleAdd to cartSpecificationsInput voltage:AC110V-220VOutput voltage:DC 21V-45VOutput current:280-300mA(adjustable)Product size:27*17*9mmWorking temperature:Ta:50 TC:75Efficiency:≥87%Power factor:0.9Product application:spotlight PAR light / bulb light / candle light / etc.Package Included5 x 5W LED Driver Input AC110/220V to DC 15-18V
CO2 Carbon Dioxide + PM2.5 Detector Module Air Quality Gas Sensor Tester Detector with 2.8inch TFT Display Monitoring Home office Car Tools
$218.93Sensor & Detector ModuleAdd to cartSpecificationsMaterial:Acrylic Case + Electronic ComponentsSize:Approx. 8.5×6.5×3.7cm/ 3.35×2.56×1.46′Processor:For ARM 32 Bit ChipsCarbon Dioxide Sensor Chip:SensorAir S8 0053(click to download document)Font color:Multi ColorsScreen:2.8′ TFT (2 different display)Resolution Ratio:320×240Power Supply:DC 5VOperation Current:1-2ATemperature Measure Range:-20 to 60 →Accuracy:÷0.1 →Language Version:EnglishFeatures– Multipurpose in air quality detection in PM1.0, PM2.5, PM10.0, AQI, CO2,temperature&humidity, suspended particulate matter– Acrylic clear case shell, high …
DIR9001 Module Coaxial Optical Fiber Receiving Module Spdif To I2s Output 24bit 96khz with Fiber Bracket
$50.29Other Module BoardAdd to cartFeaturesThe latest revision instructions, the new version cancels the manual switch, the input selection is changed to automaticWhen the COAX is input separately, it is the coaxial input mode;When the OPT is input alone, it is the fiber input mode;When OPT and COAX are input at the same time, it is the coaxial input mode, …
3Pcs W3018 Digital Temperature Controller Miniature Embedded Digital Temperature Controller Switch 0.1 12V
$24.66Test & Measuring ModuleAdd to cartSpecificationsMaterial:ABSColor:blackModel Number:ZFX-W3018Voltage:DC 12VTemperature control range:-20-100→Resolution:0.1→Refresh frequency:about 0.5SOutout type:relay output (output switch)Output capacitance:one way 10A realyMeesurement input:1 meter NTC (10k 0.5%)meter waterproof sensorSize:48*29mmPackage Inlcuded3 x Temperature Controller3 x Probe Line
AOQDQDQD Mega2560 R3 Starter Kit Motor Servo RFID Ultrasonic Ranging Relay LCD for Arduino
$70.86DIY Electronic KitsAdd to cartPackage Included1 X 2560 r3 Board1 X USB Cable1 X Jump Cable1 X Breadboard5 X LED Light1 Pack Resistor1 X Female to male dupond line1 X Potentiometer1 X Buzzer1 X 74HC5951 X Infrared receiver1 X LM351 X Flame Sensor1 X Ball Switch1 X Photoresistor1 X Key button1 X Remote control1 X 4-digit display tube1 X …
AOQDQDQD Mega2560 R3 Starter Kit Motor Servo RFID Ultrasonic Ranging Relay LCD for ArduinoRead More
20pcs 0.36 inch DC0V-32V Red LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$55.53Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
Reviews
There are no reviews yet.