EQKIT Audio Spectrum 8×4 DIY Kit Level indicator Voice Spectrum Lights Red+Blue Colorful Display
$11.74
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a kit parts. You should solder it by yourself.
Features
1. High sensitivity;
2. Low power;
3. Wide operating voltage range;
4. Low power consumption;
5. DIY design;
6. Colorful display;
7. Mode adjustable;
Parameter
No.:Parameter:Value
1:Model:ASD-84
2:Standby current:Less than 1mA
3:Soldering difficulty Level:Easy
4:Working voltage:DC 5V
5:Display LED:8*4
6:Display color:Red+Blue
7:LED Size:2*5*7
6:PCB Size:94*39.5mm
Instructions
Step 1:Complete the installation in the normal way following installation manual and schematic. (Please request separately).
Step 2:Connect audio;
Step 3:DC 4-9V voltage;
Step 4:Adjust the working mode
Step 5:Test and use.
Mode setting
Mode:Set Method:Remarks
Factory Testing Mode:Press button S1 before Power on:It is used to detect all LED whether can be ON
Fast Flashing Mode(3):Short press S1 less than 1second:The refresh frequency is very fast
Medium Flashing Mode(2):Short press S1 less than 1second:The refresh frequency is general
Slow Flashing Mode(1):Short press S1 less than 1second:The refresh frequency is slow
High Sensitivity Mode(H):Long press S1 more than 2second:It can detect weaker audio signals
Medium Sensitivity Mode(B):Long press S1 more than 2second:It can detect general audio signals
Low Sensitivity Mode(L):Long press S1 more than 2second:It can filter more interference audio signals
Using attention
1. Please make sure all the components in the right direction and right place.
2. Please check whether pseudo/float welding. This is very important.
3. The soldering iron can’t touch the components for a long time, otherwise, the components will be damaged because of the high temperature.
4. It is recommended to use a stable power supply, otherwise, it may interfere with the audio signal output.
Component list
NO.:Component Name:PCB Marker:Parameter:Quantity
1:Metal Film Resistor:R15:10ohm:1
2:Metal Film Resistor:RX1-RX4,RY5-RY12:47ohm:12
3:Metal Film Resistor:R13-R14:470K:2
4:Ceramic Capacitor:C5:0.001uF 102:1
5:Ceramic Capacitor:C2-C4:0.1uF 104:3
6:Electrolytic Capacitor:C1:220uF:1
7:Red LED:D1-D16:2*5*7mm:16
8:Blue LED:D17-D32:2*5*7mm:16
9:Audio Socket:J2,J3:SMD3P:2
10:Power Socket:J1:DC3.5:1
11:WD1084:U1:DIP-16:1
12:Button:S1:6*6*5:1
13:USB to DC Cable::100cm:1
14:Audio Cable::100cm:1
15:PCB:ASD-84:94*39.5mm:1
Application
1. Electronic teaching
2. Exercise soldering skills
3. Circuit application
Frequency asked questions
1. Why can’t work
A:Please make sure all components in the right direction and right place and check whether pseudo/float welding. This is very important.
Install tools you need preliminary preparation by yourself
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
Package included
1 x EQKIT® Audio Spectrum 8×4 DIY Kit
Weight | 0.049 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.