YAHBOOM 3.5 inch Resistive Touch Screen for Raspberry Pi 4B/3B+/3B/Zero/W
$38.95
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This 3.5-inch SPI touch screen TFT LCD display is compatible with all versions of the Raspberry Pi, 320*480 resolution. It supports Raspbian systems and SPI touch control. You can plug it directly into the Raspberry Pi pin, no external power supply needed. Small size makes it easy to carry. Software package we provide contains everything you need to start from zero.
(Note:You need to install our operating system with the pre-installed drives on a new or format SD card, if you don’t install our operating system with the pre-installed drives, you will be starting at a white LCD panel. If you want to use another system, maybe you need to add drivers by yourself.)
Specification
Type:TFT
Interface:SPI
Chip:XPT2046
Color scale index:65536
Backlight:LED
Resolution:320*480
Packing size:12*7*3.5cm
Packing Weight:73.9g
Package includes
1 x 3.5 Inch Touch Screen
1 x Stylus
1 x Drive System
Documents
Yahboom Raspberry Pi 3.5-inch screen
Details picture:
Weight | 0.1078 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.