30pcs IR infrared Obstacle Avoidance Sensor Module for Smart Car Robot 3-wire Reflective Photoelectric for
$25.43
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
Parameters
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection:VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size:3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
Package includes
30 x IR Infrared Obstacle Avoidance Sensor Module
Weight | 0.15 kg |
---|
Customers Also Viewed
1000W 220V Electric Non-Stick Cake Pan Pie Maker Iron Machine Baking Snack Maker for Kids
$74.91Solar CollectorsAdd to cartElectric Non-Stick Cake Machine Baking Snack Maker For Kids 1000w 220vSpecificationsMaterial:Aluminium, PlasticColor:YellowVoltage:220vPower:1000wSize:24*20*9.5cmFeatures– The temperature can’t be set, it’s automatic temperature control design.– It’s easy and very convenient to use, just a few minutes.– The lid is active in order to make the cake more fluffy.Package included1 X Cake Machine
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply Module
$99.90Boost & Buck ModuleAdd to cartDescriptionMini PFM ControlOn-board input voltage indicatorHigh conversion efficiency, maximum to 96%Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500-600MA, single AA battery power supply output current about 200MAOn-board USB female, can supply power directly to the USB interfaceSmall dimensionSpecificationInput …
100pcs PFM Control DC-DC 0.9V-5V To USB 5V Boost Step Up Power Supply ModuleRead More
TPA3116 Subwoofer Amplifier Board 2.1 Channel High Power bluetooth 4.2 Audio Amplifiers DC12V-24V 2*50W+100W Amplificador with Shell
$54.90Amplifier BoardAdd to cartProduct description1. This is a DC-powered 12-24V power supply, using TI’s TPA3116D2 high-performance digital power amplifier chip as the core, one to do parallel bridged bass channel power amplification output, one to do left and right channel power amplification output. support 100W (bass channel) + 50W (left channel) + 50W (right channel) three-channel output.2. Support …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser Printer
$1,239.29Laser Engraving MachineAdd to cartNotice1. Now we all supply the new version of EleksMaker A3-5500 as the pictures shown. (New version means the improved appearance of machine, while you can know what the old version looks like via the first video above.)2. The frame joint is upgraded and will be easier to assemble. (Remove corner joints and add rubber …
EleksMaker EleksLaser-A3 Pro 5500mW Laser Engraving Machine CNC Laser PrinterRead More
10pcs DC 3V-5V 20mA Rain Water Level Sensor Module Detection Liquid Surface Depth Height for Geekcreit for Arduino – products that work with official Arduino boards
$7.60Power Supply ModuleAdd to cartDescriptionWater Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read development board of FOR …
3pcs JUWEI 5V 10W 2 Switch USB Aging Discharge Loader 3 Kinds Current Test Load Power Resistor
$13.41Other Module BoardAdd to cartDescriptionRated power:10WVoltage:5VA designed according to the principle of ohm’s law and through the resistor in parallel through a different switch, can produce 3 kinds of resistance of a new USB electronic load resistance discharge, when all the switch opens, is 2.2 ohm/10W, 4.7 ohm/10W, 2 kinds of resistance in parallel at the same time, in …
Reviews
There are no reviews yet.