5pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$16.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
5 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.135 kg |
---|
Customers Also Viewed
3Pcs Mini PAM8403 3Wx2 5V Dual Channel USB Power Audio Amplifier Board Volume Control
$7.13Amplifier BoardAdd to cartSpecificationOperating voltage:2.5V-5.5VMaximum output power:3W*2(5V 4┯)PCB size:Length:30mm* Width:21mm(Overall height after installed is about 16mm.)Note1.Please make sure the power supply is not more than 5.5V and please don’t do reverse polarity for ‘+’ and ‘-‘, or else, it will burn the board.2.This PAM8403 Audio Amplifier board could be powered by USB Power supply.Package Included3 x Amplifier Board
5pcs D222 Speaker Frequency Drvider Crossover Filters with Junction Box
$30.44Amplifier BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesFrequency divider is a circuit arrangement inside the sound box, to distinguish the sound signals of different frequencies (treble, tenor, bass), respectively to enlarge, and then sent to the speaker of the …
5pcs D222 Speaker Frequency Drvider Crossover Filters with Junction BoxRead More
DIY Wind Turbine Generator Model Science Education Experiment Physical Teaching Tool Creative Toy
$37.95PhysicsAdd to cartDescription– Good choice for teaching physical DC wind power generation principle.SpecificationRated Power:0.1(W)Output Voltage:5(V)Wind Wheel Diameter:0.055(m)Blade Quantity:3PcsRated Wind Speed:3.3(m/s)Finished Product Size(LxWxH):95mmx75mmx120mmBattery:3 Sections AA Battery(not included) Features1. The model is packaged by completely accessory sets ,you need to assemble by yourself ,just enjoy the DIY fun.2. Advanced design ,high utilization rate of wind energy, no matter where …
KING PIGEON M210T 4 Switch DIN Wet Contact input + 1 RS485 + 1 RJ45 industrial Ethernet IO Remote Acquisition Module
$139.08Network ModuleAdd to cartNote:Please refer to the title for the actual supported functions.This M210T version:Support 4DI+1RS485+ 1RJ45 wet contactDocumentsManual:Click here to openTool:Click here to openThe difference between switch input dry contact and wet contactDry contactExternal disconnection:the corresponding internal data is 0External closure:the corresponding internal data is 1Wet contactLogic 0:0-3VDCLogic 1:10-30VDCIntroductionThe M210T Ethernet Remote I/O Module is an industrial …
5pcs DIY Digital Display LED Logic Pen Electronic Kit High and Low Level Test Circuit Soldering Practice Board Kit
$13.68DIY Electronic KitsAdd to cartDescriptionPower supply:DC 4.5-5VBoard size:3.5 * 5.5cmLow-level judgment voltage:0.0-0.4VHigh-level judgment voltage:3.3-5VPackage included5 x DIY Digital Display LED Logic Pen Electronic Kit
3Pcs 4S 14.8V 16.8V 18650 Lithium Battery Protection Board Startable Electric Drill 40A Current
$16.28Battery Protection ModuleAdd to cartSpecificationsScope of application:Lithium batteries with nominal voltages of 3.6V and 3.7VProduct size:46*60*3.4mmProduct weight:10.3gCharging voltage:16.8V-18.1VContinuous discharge current (upper limit):40A (If the heat dissipation environment is not good, please reduce the load current to use)Continuous charging current (upper limit):20AApplicable electric drill:electric drill with starting current below 80A and power below 135W.Note1. To start the electric drill successfully, …
Pressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 Argon
$80.99Electrical Pump & ValveAdd to cartDescriptionPressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 Argon FeaturesThe pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.And this flowmeter does not use a diaphragm,so it is more reliable than the flow-gauge style regulators.The output flow is adjustable from …
Pressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 ArgonRead More
Reviews
There are no reviews yet.