5pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$16.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
5 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.135 kg |
---|
Customers Also Viewed
REX-C100 Digital RKC PID thermostat Temperature Controller 0 To 400 Degree K Type Relay Output
$24.04Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesThis is a double universal programmable digital display temperature controller that supports many types of thermocouple sensor.It is powered by 220V ACSpecificationsScreen:Double screen for Celsius (C)Range:0-400C (Only when with K-type thermocouple factory)Thermocouple:K, …
High Gain 10dB 2.4G Wifi Directional Image Transmission Yagi Antenna
$20.07RF amplifierAdd to cartSpecificationWorking frequency:2.35-2.55GHZAntenna gain:10.5dB (typical value)Antenna standing wave ratioPower capacity:10WMechanical size:5x10Cm (excluding joints)Radiation direction:directional linear polarizationConnector type:SMA-K (standard female, outer screw and inner hole, can be customized)Package included1 x Antenna
20pcs DD2712SA 3.5A Mini 5V-27V to 12V DC DC Step Down Buck Power Converter Module Voltage Regulator
$83.70Boost & Buck ModuleAdd to cartDescriptionInput voltage:5-27VOutput voltage:5V Maximum output current:2.5AShort time maximum output current:3.5A Quiescent current:about 250uAWorking frequency:900KHz.Working efficiency:77-92% Size:25 x 15 x 6.3 mmOvertemperature shutdown, Under-Voltage Lockout (UVLO), BS-voltage protection, and short circuit protection.Note1. Input voltage can not be greater than the maximum input range.2. Output power can not be greater than the maximum load for a long …
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
25x25x5cm Soundproofing Triangle Sound-Absorbing Noise Foam Tiles
$14.16FoamAdd to cartDescription25x25x5cm Soundproofing Triangle Sound-Absorbing Noise Foam TilesSpecificationsMaterial:Polyurethane foamDimensions:25 * 25 * 5 cm / 9.84 * 9.84 * 1.97 inchBlack:ColourQuantity:1pcFeatures– Bounce rate deformation, a long duration.– Waterproof, anti-moisture, good air permeability.– Wherever to help block sound and prevent echoes in the room.– These panels provide a strong noise reduction, good for studios, recording studios, vocal …
25x25x5cm Soundproofing Triangle Sound-Absorbing Noise Foam TilesRead More
Reviews
There are no reviews yet.