3pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$10.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
3 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.081 kg |
---|
Customers Also Viewed
24S 72V Lithium Battery 3.2V Power Protection Board 30A-180A with Temperature Protection Equalization Function Overcurrent Protection BMS PCB
$60.74Battery Protection ModuleAdd to cartCurrent 30A / Current 40A / Current 50A / Current 60A / Current 70A / Current 100A / Current 130A / Current 150A / Current 180A /
ONLY LED Light Lighting Kit for Lego 42096 Technic Porsche 911 RSR Bricks Toys
$18.50DIY Electronic KitsAdd to cartDescriptionInterface:USBColor:As the picture shownFitmentONLY For Lego Technic Porsche 911 RSR (42096) Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.ONLY For Lego 42096 Technic Porsche 911 RSR Bricks.Package Included1 x LED Light Kit(Model Not Included)1 x Battery Case
500mL Clear Borosilicate Glass Filtering Flask Vacuum Filtration Flask Bottle Lab Glassware
$40.49Glassware KitAdd to cartDescription– Flasks are glass or plastic containers for storing or collecting chemical samples or solutions in scientific laboratories.– It shaped like a cone with a wide, flat base that narrows to a neck opening, which can be closed with a stopper or cap.SpecificationMaterial:Borosilicate GlassCapacity:500mLFlask Style:Filtering (vacuum)Package Included1 x Glass Filtering Flask
2400mAh Portable Solar Panel Charger Reusable Solar Generator System USB Port with Lamp Lighting
$64.79Solar GeneratorAdd to cartFeature1.Reusable solar generator, solar charging, environmental protection and energy saving, you can use it in anywhere when there is adequate sunshine.2.Equipped with USB charging cable, you can charge your electronic products easily with the built-in large capacity battery, you can charge for mobile phones, MP3, MP4, digital cameras and other electronic products.3.White LED light and …
20pcs Sensor Shield V5.0 Sensor Expansion Board for DIY Electronic Building Blocks of Robot Parts
$62.36Sensor & Detector ModuleAdd to cartFeaturesLatest Sensor Shield V5.0 sensor expansion board is still before laminated design PCB Immersion Gold processing technology, the motherboard is not only Duemilanove 2009 controller of digital and analog interface extended to the steering gear line order form, also ad hoc IIC interface, 32 Servo controller interface , bluetooth module communication interface, SD card module …
Reviews
There are no reviews yet.