3pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$10.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
3 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.081 kg |
---|
Customers Also Viewed
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home Smart
$8.73Relay ModuleAdd to cartManual:http://myosuploads3.hobbyant.com/products/20190219/20190219034014C255V9V12V.pdfApplicationsThis module is a switch instant turn-on trigger delay module, which can be applied to home intelligent systems, anti-theft alarm delay, door control system, automation equipment control, PLC industrial control, electronic development and so on.Description1. Using advanced high-quality timing chip control, accurate timing, performance is much better than 555 chip;2. The trigger terminal has optocoupler …
BESTEP C25 12V Normally Open Trigger Delay Relay Timer Module Vibration for Home SmartRead More
2.5W Mini Laser Engraving Machine 2-axis Engraving Machine for Wood Plastic Paper Bamboo Horns Leather Sponge Paper
$503.82Laser Engraving MachineAdd to cartProduct instruction and installation please:https://drive.google.com/openid=1MH931sFiPqf-L45WqXmfEAN4TrrFrlu-SpecificationsName:2-axis Engraving MachineModel:969407Size:600*550*150mm/24*22*6inStroke:380*260mm/15*10inCommunication Interface:miniUSBLaser Power:2500mwStepper Motor:42H34SVoltage:AC110-220V to DC12VControl Board Selection:DVP SE 2-axis engraving machine control boardSoftware Support:wifidevelo, Candle, Benbox, GrblController, LiteFire, etc. All GRBL-enabled softwareFeatures-The new custom V-slot aluminum matching rolling bearing X24, the accuracy is better and more stable.-There is no limit to the size and height of the engraving …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage Meter
$20.60Test & Measuring ModuleAdd to cartFeature1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected.2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is …
10pcs 0.28 inch 3-wire 0-100V Digital Red Display DC Voltmeter Adjustable Voltage MeterRead More
6W 6V 260x140x2.5mm S0506 Portable Semi-flexible Solar Panel with Back Junction Box Single USB Charger + 4xSucker + 2x Carabiner Kit
$32.26Smart Robot & Solar PanelAdd to cartFeatures– Portable and frame design– Standard USB output– thin design make it very easy to carry.– Monocrystalline silicon solar cells and epoxy resin surface seal.– Comes with four suckersSpecifications– Size:Approx. 26x14x0.3cm/ 10.24×5.51×0.12inch-Actual Power:6W– Solar output:6V 1700mA– Voltage regulator tube output:5V 1200mA– USB regulated output:5V 1200mAh– Output:USB 5V ,1200mAh– Charge time:3-5h– Solar open circuit voltage:6.8V (max)– …
DC 7V-24V Audio input Switch Board 4-way Audio Source Switch Board Audio Signal input Switch Board Switch Relay DIY Kit
$18.83DIY Electronic KitsAdd to cartSpecificationName:Audio signal switcherVoltage:DC 7V-24V, AC 6V-18VFunction:Four groups of audio signals are connected at the same time, and one group of signals is outputMethod:Rotary switching, switching once when rotating.Relay switching, zero loss.Application:computer, TV, mobile phone, home theater.Package included1set of Audio signal switcher
22.5V 1.25A 33W AC Power Adapter Charger for iRobot
$66.81AC/DC AdaptersAdd to cartSpecificationsName:AC Power Adapter ChargerInput:AC 100-240V 1.5A 50/60HzOutput:DC 22.5V 1.25A 33WInterface:5.5mm*2.5mmSafe:CE,RohsColor:BlackMaterial:PCSize ①Length:11.3cm ②Width:4.5cm ③Height:3.1cm ④Total Length:120cm (including wire)Fit for iRobot 400 500 600 700 770Features1.With heat dissipation intelligent chip and environmentally friendly material.2.Avoid power leakage and fire prevention.3.Strong and durable,long serve life.4.The tool is simple & easy to use.5.Small and beautifully designed and strong practicability.6.High performance …
22.5V 1.25A 33W AC Power Adapter Charger for iRobotRead More
Desktop Game Fun Game Penguin Ice Breaking Save the Penguin Great Family Education Toys
$28.42MathematicsAdd to cartFeatureThe One Who Make The Penguin Fall OffThe Will Lose This GameDon’t Fall Into The Trap Of The Opponent!See Who Can Get The Final Victory!SpecificationColor:As pictureSize:About 23*23*6CMMaterial:Environmentally Materials,ABS PlasticPackage Include1Set x Penguin Ice BreakingPlease NoteThe Picture is only for reference, please make the object as the standard.
Reviews
There are no reviews yet.