10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
PM3 Proxmark3 V5.0 IC+ID Full Encryption Card Reader All-in-one Access Control Elevator Garage NFC Multiple Card
$207.99Card ReaderAdd to cartFeatureIt is only used for learning RFID NFC communication and testing the technical security of RFID, as a basic learning tool for RFID personnel. Use for illegal purposes is prohibited.Increase the reading memory, you can read more cards, and the reading speed is faster and stronger.Support one-click reading, easy export and import filesSupport dual-frequency cards, …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth Board
$42.69Smart ModuleAdd to cartProduct introductionJDY-64 is a low power consumption lossless two-channel stereo design, and the overall performance is very advantageous. It only needs to connect the module to the application products so that users can quickly achieve wireless music transmission, which defaults no prompt tone for button, switch, connection, fragment opening, and integrated SD card defaults earphone …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth BoardRead More
LILYGO TTGO T-Bot ESP32 Main Chip T-Block with HC-SR04 Module Programmable Hardware MINI Trolley
$91.31Smart ModuleAdd to cartMore Information:https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library FeatureHardware SpecificationChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa single-/dual-core 32-bit LX6 microprocessorFLASH16MB / PSRAM 8MBSRAM 520 kB SRAMButtonSwitch, ResetUSB to TTLCP2104Modular interfaceI2C On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking temperature range -40→ ~ +85→Size55*46*53 mmWeight48.3gPower SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VBattery3.7V lithium batteryJST Connector2Pin 1.25mmUSBWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4┢S Protection intervalFrequency …
UAF42 Active High Pass Low Pass Bandpass Filtering Frequency Gain Q Adjustable General Filter
$41.54Other Module BoardAdd to cartUAF42 has the following featuresHighly versatile, can be changed as high pass, low pass, band pass and band stop filters as needed (Jumper settings);The design is simple. BB has also designed a software specifically for the UAF42, which makes it easy and flexible to design different types of filters.With high precision frequency and high Q …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$15.84DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
10pcs 2.54mm 2x4P 8P Double Row Female Straight Pin Header Needle Socket Pin Strip
$6.55Electronic Accessories & SuppliesAdd to cartSpecificationsSpacing:2.54mmGender of Connector:FemaleNumber of Pins:2x4PinType of Row:Double RowType of connector:StraightPackage included10 x 2.54mm 8P double row female straight pin header
Excellway 20Pcs JST Female and Male Battery Connector Set
$10.11ConnectorsAdd to cartDescriptionBrand:ExcellwayName:5 x JST BEC Set Female and Male Battery Connector Bu ggy Truck PlaneMaterial:metal + PlasticFeatures1. Includes 10 RC JST BEC Set Female and Male Battery Connector2. Long service life.3. Easy to install.Package Included5 x male Connectors5 x female Connectors5 x female pins5 x male pins
Reviews
There are no reviews yet.