24V 1 Channel Level Trigger Optocoupler Relay Module
$4.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module uses genuine quality relay, normally open interfaces
Using SMD optocoupler isolation, driving ability, stable performance
The module can be high or low by a jumper setting trigger
Fault-tolerant design, even if the control line is broken, the relay will not operate
The power indicator (green), the relay status indicator (red)
The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
Specification
Maximum load:AC 250V/10A, DC 30V/10A
Trigger current:5mA
Working voltage:24V
Module size:50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
Module Interface
DC+:positive power supply (VCC)
DC-:negative power supply (GND)
IN:can be high or low level control relay
Relay Outputs
NO:normally open relay interface
COM:Common Interface Relays
NC:normally closed relay interface
High and low level trigger options
It is low level trigger when jumper connect to LOW pin
It is high level trigger when jumper connect to HIGH pin
Package included
1 x 1 Channel H/L Level Trigger Optocoupler Relay module
Weight | 0.018 kg |
---|
Customers Also Viewed
433MHz 100M Wireless Transceiver Module Kit Transmitter + Receiver + 2pcs Copper Spring Antenna
$8.73Smart ModuleAdd to cartDescriptionSTX882 ASK Wireless Remote Control Transmitter ModuleSTX882 is a ASK transmitter module with small size, ultra high power, low harmonics. With high stability, it can be achieved at 50mW power when the voltage is 3.6V, it is the maximum transmitter power module under the the same voltage in the market. Data port of the module …
5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable
$10.92Other Module BoardAdd to cart5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable ForFeature1. With FT232RL chipset, support 3.3V, 5V2. With over current protection, using 500MA self-restore fuse3. RXD/TXD transceiver communication indicator4. Pin definition:DTR,RXD,TX,VCC,CTS,GNDPackage included1 x USB Module
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car Home
$74.91Solar CollectorsAdd to cartSpecificationsColo:BlackModel:G30Input voltage:AC 220V/ DC12V(in car)Plug:EU plug(sent with an adapter according to your country)bluetooth:SupportRMS power:18W x2Peak power:45W x2Load impedance:4-16ΩSNR:85 dbFM frequency:87.5-108MHzDistoration rate:0.05%Frequency:10Hz-20KHzSize:Approx. 19×12.5×4.5cm/ 7.48×4.92×1.77inchFeatures-Mini HIFI digital bluetooth audio power amplifier.-TF Card, AUX, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-With treble, bass, and volume control, very easy to use.-Low distortion supplies a …
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car HomeRead More
KY-011 5mm 2 Color Red and Green LED Common Cathode Module Board for Arduno Diy Starter Kit 2-color KY011
$4.36LED BoardAdd to cartSpecificationsColor:Green + RedDiameter:5mmPackage Type:DiffusionVoltage:2.0-2.5vCurrent:10mAViewing angle:150 degreeWavelength:571 +644 nmLuminous intensity (MCD):20-40; 40-80Stent type:long-leggedPackage Included1 x KY-011 Two Color Red and Green LED Module for Arduno
1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit
$19.67Electronic Accessories & SuppliesAdd to cart1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit Red / Green / Blue / White / YellowParameterWorking current:20 (mA)Working voltage:Red:1.9V-2.1V Yellow:1.9V-2.1V Blue:3.0V-3.2V Green:3.0V-3.2V White:3.0V-3.2VMCD:Red:1000-1500 Yellow:700-900 Blue:2000-3000 Green:7000-9000 White:6000-8000Wave length:Red:620-625 Yellow:588-590 Blue:455-465 Green:567-570 White:Color temperature 8000Each colors 200Pcs, total 1000PcsPackage included2 x 500Pcs 5 Colors LED Diode kit
4 Digit LED Display Tube 7 Segments TM1637 50x19mm Blue Clock Display Colon Module
$13.11Display ScreenAdd to cartFeatureThis is a basic 4-digit 7-segment display module.The display features double points in midle. The decimal point per digit not active.Module connecting to digital I/O on 2 pins.For Arduino use library:TM1637.hPackage includes1 x LED Display TubeSketch include inchTM1637.hinch // include the TM1637 libraryTM1637 display(2, 3);// // initialize the library for pins 2, 3void setup()void loop()
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread Flash
$69.97DIY Electronic KitsAdd to cartSpecification1. Name:LED Light Set2. Model:D858093. Material:Plastic4. Power:Less Than 5V5. Fitment:For Lego 10267Note1. LED Light Set Only. Toy is not included.2. Manual installtion. It needs to be assembled by yourself.Package Included10 x 15cm Bit Light(Warm White)1 x 15cm Enhance Bit Light(Warm White)4 x 30cm Flashing Bit Light(Red)4 x 30cm Flashing Bit Light(White)1 x Multi Colour Light …
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread FlashRead More
Reviews
There are no reviews yet.