5pcs 1 Channel 5v Relay Module High And Low Level Trigger
$13.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Maximum load:AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage:5V.
Every channel of the module can be set high or low level trigger by jumper.
Fault tolerant design, even if the control line is disconnect, the relay will not act.
Power indicator (green), 1 relay status indicator (red).
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:50mm x 25mm x 18.5mm (length x width x height).
There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm.
Module interface
1, DC+:Connect the power positive pole.
2, DC-:Connect the power negative pole.
3, IN1:Can be controlled by high or low level.
Relay output:there is a 3 wire interface, all interfaces can be directly connected to lead to facilitate user use.
1, NO1:Relay normal open, the relay suspends before pulling in, and then short-connect with the COM.
2, COM1:Relay common interface
3, NC1:Relay normal close, short connected with COM before pulling inand suspended after pulling in.
High and low level trigger option
1. The 3-pin is the high level trigger selection.
2. When COM is short connected with LOW, the corresponding relay is LOW level trigger, while when COM is short connected with high end is high level trigger.
Package Included
5 x 1 Channel 5V Relay Module
Weight | 0.09 kg |
---|
Customers Also Viewed
5065cm Engraving Area Laser Engraving Machine DIY Kit Desktop Laser Cutting Printer-without Laser Module
$356.97Laser Engraving MachineAdd to cart1. Benbox Software & Manual:Click to download2. Assembly Instructions, please check:http://myosuploads3.hobbyant.com/products/20190326/201903260314326550.zipDescriptionThis DIY desktop blue laser engraving machine is ideal for amateurlaser engraving usage with grayscale printing,low-light positioning and freedompositioning functions.It only need you to connect it to the computer,then you canprint any pictures your like with your own creativity.SpecificationsMaterial:stainless steel and acrylicWorking Voltage:DC 12VEngraving Area:65x50cm(maximum)Size:72x63cmControl …
3pcs 0.36 inch DC0V-32V Red LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$10.64Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
120A Amplifier Rectifier Filter Supply Power Board High Power Schottky Rectifier Filter Power Supply Board 10000uf 125V
$109.34Other Module BoardAdd to cartSpecification – Power board with double-sided tinplate PCB board, 8 H-itachi 10000uf 125V capacitor, 4 original import disassemble Schottky 30A150V equivalent to 120A bridge heap!– Schottky’s characteristics are fast, small internal resistance (pressure drop naturally low),So the original rectifier than the original power amplifier for the high demand for power.– Input power:Maxmium Double AC 60V(60V-0-60V)– …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop Fan
$153.89Solar CollectorsAdd to cartFeaturesThe fan runs when plugged to the solar panel. And it can be used alone by plugged into computer USB port.When plugged to the solar panel, how the fan works depends on the sunlight.When the sunlight is strong, the fan works fast. When the sunshine is not strong enough, the fan may work low or …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop FanRead More
10pcs DC 12V 6A 3 String Battery Protection Board Panels Solar Street Lights
$29.51Other Module BoardAdd to cartDescriptionSize:56x45x3mmContinuous working current:Within 6ACharge current:Within 6ABalance charging:YesShort circuit protection:YesFunction:Prevent overcharge, overplay, circuit protectionSuitable assembly:Nominal 3.7V electric core / three stringsPackage Included10 x 12V Battery Protection Board
Practical CPU info 1.6 inch 84×48 Matrix LCD Memory Display Module with Backlight for Raspberry Pi
$20.80Raspberry Pi & Orange PiAdd to cartFeatures∵ 1.6 inch, 84 x 48 pixels matrix LCD∵ Through the Raspberry Pi internal C programming, to Pi running on the CPU occupancy rate and memory occupancy rate display on the LCD screen, be clear at a glance∵ Can be programmed to show what you want to display∵ A backlight jumper back through the software …
Reviews
There are no reviews yet.