ICL7107 Voltmeter DIY Electronic Production Kit DC5V 35mA Voltage Meter Digital Voltmeter
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Kit Name:ICL7107 Voltmeter DIY Kit
PCB size:70.6*39mm
Head mounting opening size:77*40mm
Display window size:51*24mm
Soldering manual:Click here.
Electrical parameters
Working voltage:DC5V
Working current:35mA
Measurement accuracy:It can be calibrated to get higher precision and no parameters at present.
Measuring range:divided into 3 files, 0-2V file Measuring small voltage
0-20V file measuring low voltage
0-200V, measuring higher voltage.
Range selection method:solder joints with gear selection on the board,
When the two points of the 0-2V file are soldered together, and the resistance of the RX soldering resistor is 1K, the measurement range is 0-2V;
When soldering 2 points of 0-20V file together, the RX soldering resistance is 100K, the measuring range is 0-20V;
When soldering 2 points of 0-200V file together, the RX soldering resistance is 1M, the measurement range is 0-200V;
Overrange display:first position shows 1 or -1
In the kit, the RX is available in 100K and 1M, and the buyer selects the soldering according to his measurement range. This voltmeter can also be changed into an ammeter. The method of changing the current meter:the PCB reserve a 2W 0.1 ohm high-precision resistance soldering position on the board, solder this resistance, and then RX does not need to be soldered. This is a 0-2A ammeter.
Display color:red
Tools needed to make the production:multimeters, electric irons, and water pliers are needed.
Package included
1 x PCB board
3 x 1N4148
1 x 5.1V Zener Diode
1 x 100 ohm resistor
1 x 270 ohm resistor
2 x 2K resistor
1 x 20K resistor
1 x 47K resistor
1 x 56K resistor
2 x 100K resistor
1 x 1M resistor
1 x 2.2MH inductor
2 x 104 monolithic capacitor
2 x 101 monolithic capacitor
1 x 224 monolithic capacitor
1 x 474 monolithic capacitor
2 x 10UF25V electrolytic capacitor
1 x C1815
1 x TL431
2 x 3296-202 potentiometer
1 x XH2.54-2P straight seat
1 x XH2.54-2P line
1 x KF301-2 seat
1 x 40P chip holder
1 x LT7107 chip
4 x 0.56 one common digital tube
1 x case
4 x M2*6 self-tapping screws
Weight | 0.051 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.