5pcs 12 in 1 Blue USB Tester DC Digital Voltmeter Amperemeter Voltagecurrent Meter Ammeter Detector Power Bank Charger indicator
$48.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical parameters
Voltage measuring range:3.60V ~ 32.5 V Resolution precision:0.01 V
Current measuring range:0.00A ~ 5.00 A Resolution precision:0.01 A
Power cumulative range:0 ~ 999999 WH Resolution precision:0.001 Wh
Capacity range:0 ~ 999999 mAH Resolution precision:0.001 Ah
Temperature:0 → ~ + 80 → Resolution precision:1 →
D+ Voltage:0.000V ~ 2.999 V Resolution precision:0.001 V
D- Voltage:0.000V ~ 2.999 V Resolution precision:0.001 V
Load impedance:0 ~ 999 ohm Resolution precision:1 ohm
Power metering range:0 ~ 299.999 W Resolution precision:0.001 W
Timing maximum time:999 H 59 M 59 S Resolution precision:1 S
Time to refresh:> 500 ms/time > 500 ms/times
Measurement rate:0.5 times/s
Use large equipment of the same metal manganese bronze sampling resistor (1.0 mm diameter metal manganese bronze material
Product size:65 x 24 x 14 mm
Since the power flow
Working temperature:- 10 ~ + 60 →
Working humidity:10 ~ 80 (no doubt)
The pressure of work:80 ~ 106 kpa
Cumulative capacity range:0-99999 mah precision:0.001 Ah (New features or D+ D- Voltage)
Specifications
Item size:65 * 24 * 14 mm
Net weight:19g
Package weight:28g
Color:Blue
Function characteristics
1) 8192 pixels HD display;
2) D+ D- Voltage Tester
3) Memory power time data such as power;
4) The single monitoring shows charging voltage, current, power, power WH, mAH, charging time and other information;
5) USB is the copper pin and low resistance in sampling technology, access after almost does not affect the charging speed;
6) Wide voltage from 3.60 V to 32.5 V;
7) Low and lower power since the
8. When the power is > 0.5W, the time will be calculated!
Important Tips
1) Backlight default time is 10S time, through the key button, switch to the BL interface:10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time, and the same time backlight switch inchBL:OFF(time) ~BL:ON( time) 1S ~ 59S rangeinch Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction.To meet the individual needs of users.
BL:10S→ USB tester default backlight time is 10S, 10S automatically turn off screen brightness
BL:ON→USB tester backlight is on, always on
BL:OFF→USB tester backlight is off, there is no backlight
3) When the ambient temperature changes or the outside heat conduction to tester causes the current to not return to zero and the display shows 0.01A or 0.02A or otherwise, Please Hold on the key button then insert to USB Charger It can make the current temperature of the ambient current zero calibration, After the zero can more accurate measurements. And when in Zero calibration, the output cannot have any load current consumption, so USB tester display 0.00A
Packing includes
5 x Digital USB Voltmeter Tester
Weight | 0.08 kg |
---|
Customers Also Viewed
MP-4 Gas Sensor Methane Sensor Detecting Combustible Methane Gas at Semiconductor Combustible DIY for Safety Detection System
$5.01Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.OverviewThe MP-4 methane sensor uses a multi-layer thick film manufacturing process to fabricate a heater and a metal oxide semiconductor gas sensing layer on both sides of a micro Al2O3 ceramic substrate, …
5pcs 5W LED Driver input AC110/220V to DC 15-18V Built-in Drive Power Supply Adjustable Lighting for DIY LED Lamps
$11.61Driver ModuleAdd to cartSpecificationsInput voltage:AC110V-220VOutput voltage:DC 21V-45VOutput current:280-300mA(adjustable)Product size:27*17*9mmWorking temperature:Ta:50 TC:75Efficiency:≥87%Power factor:0.9Product application:spotlight PAR light / bulb light / candle light / etc.Package Included5 x 5W LED Driver Input AC110/220V to DC 15-18V
CO2 Carbon Dioxide + PM2.5 Detector Module Air Quality Gas Sensor Tester Detector with 2.8inch TFT Display Monitoring Home office Car Tools
$218.93Sensor & Detector ModuleAdd to cartSpecificationsMaterial:Acrylic Case + Electronic ComponentsSize:Approx. 8.5×6.5×3.7cm/ 3.35×2.56×1.46′Processor:For ARM 32 Bit ChipsCarbon Dioxide Sensor Chip:SensorAir S8 0053(click to download document)Font color:Multi ColorsScreen:2.8′ TFT (2 different display)Resolution Ratio:320×240Power Supply:DC 5VOperation Current:1-2ATemperature Measure Range:-20 to 60 →Accuracy:÷0.1 →Language Version:EnglishFeatures– Multipurpose in air quality detection in PM1.0, PM2.5, PM10.0, AQI, CO2,temperature&humidity, suspended particulate matter– Acrylic clear case shell, high …
DIR9001 Module Coaxial Optical Fiber Receiving Module Spdif To I2s Output 24bit 96khz with Fiber Bracket
$50.29Other Module BoardAdd to cartFeaturesThe latest revision instructions, the new version cancels the manual switch, the input selection is changed to automaticWhen the COAX is input separately, it is the coaxial input mode;When the OPT is input alone, it is the fiber input mode;When OPT and COAX are input at the same time, it is the coaxial input mode, …
3Pcs W3018 Digital Temperature Controller Miniature Embedded Digital Temperature Controller Switch 0.1 12V
$24.66Test & Measuring ModuleAdd to cartSpecificationsMaterial:ABSColor:blackModel Number:ZFX-W3018Voltage:DC 12VTemperature control range:-20-100→Resolution:0.1→Refresh frequency:about 0.5SOutout type:relay output (output switch)Output capacitance:one way 10A realyMeesurement input:1 meter NTC (10k 0.5%)meter waterproof sensorSize:48*29mmPackage Inlcuded3 x Temperature Controller3 x Probe Line
AOQDQDQD Mega2560 R3 Starter Kit Motor Servo RFID Ultrasonic Ranging Relay LCD for Arduino
$70.86DIY Electronic KitsAdd to cartPackage Included1 X 2560 r3 Board1 X USB Cable1 X Jump Cable1 X Breadboard5 X LED Light1 Pack Resistor1 X Female to male dupond line1 X Potentiometer1 X Buzzer1 X 74HC5951 X Infrared receiver1 X LM351 X Flame Sensor1 X Ball Switch1 X Photoresistor1 X Key button1 X Remote control1 X 4-digit display tube1 X …
AOQDQDQD Mega2560 R3 Starter Kit Motor Servo RFID Ultrasonic Ranging Relay LCD for ArduinoRead More
20pcs 0.36 inch DC0V-32V Red LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$55.53Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
Reviews
There are no reviews yet.