SMATRUL 433mhz Wireless Remote Control Smart WiFi Socket Wall Programmable Electrical EU Plug Outlet Switch 220v 230v LED Lights
$28.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
1.Working voltage for socket:220V~230V 50Hz
2.Transmission frequency:433.92MHz
3.Max. Load current:10A
4.12V 23 A battery(battery is not included)
5.Socket size:100*54*79mm
6.Remote control size:104*36*14mm
7.Max. Leistung:2300 W
8.30~~100M WIRELESS RANGE
9.POWERFUL FR SIGNAL find outlets through doors and walls(in the open air)
10.Socket Plug:EU Plug
Learn function button
1.Press once:switch the radio-controlled socket on or off manually. Press and hold the learning button:reset the radio-controlled socket and reprogram it with the remote control.
2.Remote control, caring for family
3.No need to wake up to turn off the appliance
Flame retardant material
1.Energy saving
2.safety protection devices
3.Environmentally friendly material
4.Ce certification
Pairing signal
1.Press the pairing signal key for 5 seconds,
2.see the indicator light flashes.
3.Press the button on the remote control
4.immediately,the signal is successfully paired.
Clear signal
1. Disconnect power socket.
2. Hold down the learn button.
3. While keeping the learn button pressed, plug the power outlet into the power source.
4. Wait until the LED flashes quickly and then goes out again.
5. Release the learn button. The socket is now reset.
6. Press the learn button again to reprogram the socket.
Multiple combinations, free pairing signal
Prevent interference with the design, without affecting other TV remote controls, doorbell buttons, etc.
Wide compatibility
Compatible with all devices, such as lamps, lamps, air conditioning, heating, audio sound system, machinery ,String of holiday lights and all consumer electronics.
For the crowd wide
Suitable for the elderly, children, women, disabled people, etc.
Package includes
1 x Wireless Remote Control
1 x Smart Socket
Weight | 0.19 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.