1S 2S 3S 4S Single 3.7V 18650 Lithium Battery Capacity indicator Module Percent Power Level Tester LED Display Board
$6.75
Type 1 string / Type 2 string / Type 3 string / Type 4 string /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The smart battery indicator panel, gently press the trigger switch, and the display will automatically close after 3 seconds.
Static power consumption 2-3 microamp, negligible.
Multiple battery packs are available, such as single,2,3,4, lithium battery packs.
Indicator color:25% red, other 3 green
Size:44 x 9 x 7.5 mm
Application scope
To detect the battery power, just connect the positive/negative electrode of the battery to the positive/negative electrode of the battery indicator board, and gently press the trigger switch to measure the current battery power. The total capacity of the battery is divided into 4 sections by 4 leds. The power level of the battery is known by the flick of a switch.
Power Indicator
1Series of battery power indicator
25% The first light is on (voltage around 3.4V)
50% second light (voltage 3.6V or so)
Third light (voltage 3.8V or so)
100% fourth light (voltage around 4V)
2Series of battery power indicator
25% First light on (voltage 6.6V or so)
50% second light on (voltage around 7V)
75% Third light (voltage around 7.5V)
100% fourth light (voltage around 8V)
3Series of battery power indicator
25% First light on (voltage 10.4V or so)
50% second light (voltage around 11V)
75% Third light (voltage around 11.5V)
100% fourth light (voltage 12.4V or so)
4Series of battery power indicator
25% First light on (voltage 13.6V or so)
50% second light (voltage around 14.4V)
75% Third light (voltage around 15.2)
100% fourth light (voltage around 16V)
Battery voltage greater than or equal to 11V, turn on the first light 25%
When the battery voltage is 11.6V or greater, turn on the second light 50%
Battery voltage greater than or equal to 12.3V, third light 75%
Battery voltage greater than or equal to 13.1V, turn on the fourth light 100 %
Package included
1 x Lithium Battery Capacity Indicator Module(1S 2S 3S 4S optional)
Weight | 0.01 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.