20pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$54.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
20 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.54 kg |
---|
Customers Also Viewed
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel Tool
$56.69Mesh & Wire ClothAdd to cartSpecificationsColor:White+blueMaterial:ABSSize:49×31.5cm / 19×12′Deepth of net:52cm / 20′Fits for:Extension poles of the diameter of 3cm/1.2′Feature– Making cleaning and maintaining the pool simple, fast, and convenient, for safe and sanitary.– Spring-loaded locking clips on the handle to attach extension poles.– Deep bag and fine-mesh are great for grabbing dirt and small debris from the pool bottom.– Made …
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel ToolRead More
18650 Battery Box Rechargeable Battery Holder Board with Switch for 2×18650 Batteries DIY kit Case
$4.36Other Module BoardAdd to cartSpecificationsNumber of sections:2Uses:for 18650 battery (without battery)With switch:YesSize:42*22*90mmCable:15cmPackage Included1 x 18650 Battery Box Rechargeable Battery Holder
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit Breaker
$18.21Switch AccessoriesAdd to cartSpecificationsName:Overload ProtectorBrand:KUOYUHRated current:25ARated Voltage:125/250V AC, 32V DC, 50-60HZBreak capacity:1000A x 125V AC, 200A x 250V ACPressure ability:1500V AC for 1 minute, the leakage current is less than 0.5mAMinimum Voltage:less than 0.25VReset time:within 60 secondInsulation resistance:500V DC continuous for 5S, the insulation resistance will be more than 100MΩWeight:35gCertificate:UL,CSA,VDE, RoHSFeatures– When the load exceeds the rated current, …
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit BreakerRead More
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
3pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$6.87Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
Mini-Whip MF/HF/VHF SDR Antenna Miniwhip Shortwave Active Antenna for Ore V6N7
$56.85Motherboard & Development BoardAdd to cartDescriptionAccessory Type:USB To DC CableCompatible With:HackRF RTL-SDRColor:greenMaterial:metal + pcProduct DescriptionEffective bandMedium waveShortwaveUltrashort waveApplicable environmentIndoorOutdoorVoltage range:9V-15VPackage includes2 x Antenna2 x Module1 x Power cable
5pcs W1701 12V DC Digital Temperature Controller Switch thermostat Adjustable thermostat Temperature Switch Cooling Controller
$41.51Sensor & Detector ModuleAdd to cartSpecificationModel:W1701Size:Approx. 36.5×36.5×18 mm/1.44×1.44×0.71 inchInstallation screw:M3 * 2 diagonal size 39.5mmTemperature range:20-90 °Control Mode:Heating, Cooling, Heat dissipationControl Accuracy:0.1 °Hysteresis Setting:1-10 °Refresh Rate:0.5SSupply Voltage:DC 12VOutput Voltage:DC 12VOutput Power:Max 200WStatic Current:≤ 3MA, attract current ≤ 60MATemperature Probe:10K thermistorB25 = 10K 395030cm Waterproof SensorEnvironmental Requirements:-10 ~ 60 °Humidity 20% -85%Can be used in the (liquid, mold, space) and other …
Reviews
There are no reviews yet.