BESTEP 1 Channel 5V Relay Module 30A with Optocoupler Isolation Support High And Low Level Trigger
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module adopts high quality 30A relay, and the maximum load is normally open interface:AC 250V/30A, DC 30V/30A;
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA;
Module working voltage:5V
Can be set up by high jumper or low level trigger.
Fault-tolerant design, the relay will not operate even if the control line is disconnected.
Power indicator (green), relay status indicator (red)
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:50mm x 33mm x 24mm (length * width * height)
Product net weight:36g
There are 4 fixed bolt holes, holes 3.1mm, spacing 44.5mm x 27.5mm
Relay version:5V
Quiescent current:5mA
Maximum current:190mA
Trigger current:2-4mA
Module interface description
1. DC+:module DC power supply positive pole (trigger terminal voltage positive).
2. DC-:module DC supply negative pole (trigger terminal voltage negative).
3. IN:signal trigger terminal (default trigger voltage is the same as power supply).
4. JD+:relay control terminal voltage positive pole
5. JD-:relay control terminal voltage negative pole
6. DC +/- and JD +/- uses jumper cap short connection, trigger terminal and relay control terminal voltage is the same.
7. Selection of high and low level trigger mode, when jumper is connected to L-terminal, IN-terminal is low level trigger, and H-terminal is high level trigger.
8. Normally closed terminal (NC):relay normally closed.
9. Public terminal (COM):common terminal of relay
10. Normally open terminal (NO):relay normally open.
Package Included
1 x 1 Channel 5V Relay Module
Weight | 0.036 kg |
---|
Customers Also Viewed
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY Parts
$5.45DIY Electronic KitsAdd to cartFeatureSize:5.8*3.7cm Power supply voltage:DC 5VFunction introductionRP1, R1, R2, R3 and RT in the circuit form a temperature measuring bridge. When the temperature is below the preset temperature, the potential of pin 2 of UA741 is higher than that of pin 3, pin 6 of 741 outputs a low level, LED1 is on, and the buzzer …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY PartsRead More
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node Module
$18.41Smart ModuleAdd to cartFeatureThis module is mainly controlled by ESP8266-01/ESP-01S, and DHT11 is a temperature and humidity sensor. The temperature and humidity in the ESP8266 acquisition environment are uploaded to the server. Support 3.7v-12V DC power supply (3.7V lithium battery). Can be used as a temperature and humidity collection node for smart home or IOT projects.CharacteristicMaster:ESP-01/ESP-01S (This module …
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node ModuleRead More
2Pcs/Pack Plastic Tire Wheel with DC 3-6v Gear Motor for Smart Car
$13.93Smart Robot & Solar PanelAdd to cartSpecificationMotor1. Voltage:DC 3V-6V2. Current:100 MA-120MA3. Reduction rate:48:14. RPM (With tire):100-2405. Tire Diameter:65mm6. Car Speed(M/minute):20-487. Motor Weight (g):29/each8. Motor Size:70mm X 22mm X 18mm9. NoiseTire Parameter1. Center hole:5.3MM x 3.66MM2. Wheel size:65 x 26mmPackage Included2 x Smart Car Robot Plastic Tire Wheel2 x DC Gear Motor
ACS714 5A 5V Current Sensor Breakout Board Isolate Filter Resistance Capacitor Hall Effect Module
$16.23Sensor & Detector ModuleAdd to cartIntroductionThis current sensor is a carrier board or breakout board for Allegro’s ACS715LLCTR-30A-T Hall effect-based linear current sensor, The sensor operates at 5 V and has an output sensitivity of 133 mV/A. The board ships fully populated with its SMD components.FeatureDesigned for unidirectional input current from 0 to 5 A, but the sensor will provide …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication Module
$21.86Motherboard & Development BoardAdd to cartIntroduction CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your /Seeeduino CAN-BUS capibility. With …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication ModuleRead More
Reviews
There are no reviews yet.